News

Construction Drawings: What a Full Set Includes | Sunvega Design

Construction drawings are the set a builder works from, and a full package runs 45-65 sheets. They are not one drawing but five coordinated layers. Sunvega Design produces them from a floor plan and a short site video. Construction drawings begin with the floor plan and end with the electrical layou

Sunvega
Construction Drawings: What a Full Set Includes | Sunvega Design

Construction drawings are the set a builder works from, and a full package runs 45-65 sheets. They are not one drawing but five coordinated layers. Sunvega Design produces them from a floor plan and a short site video.

Construction drawings begin with the floor plan and end with the electrical layout

Everything starts with the floor plan, because it fixes room sizes and circulation. Door and window positions and stair width come from the same base. Every later sheet inherits those numbers, so an error here travels.

Elevations sit outside the plan and show the finished face of the house. Sections cut through it and show floor levels, roof buildup, and stair depth. Neither replaces the plan, because they answer different questions.

Plumbing and electrical come last, after the layout is settled. A pipe that crosses a new beam is cheaper to catch on paper. So is an outlet placed behind a door.

What the drawings actually show

Construction drawings set wall buildup, window openings, stair construction, and kitchen and bathroom details. The builder can read how a wall closes, not only where it stands, and can build from it without calling back.

Plumbing sheets carry supply, drainage, roof rainwater, and the septic tank. Each route has to match the room above it and the ground outside. A tank placed inside the setback line has to be dug up and moved.

Electrical sheets place lighting, outlets, air conditioning, and TV wiring. They are drawn against the furniture layout, so every point lands where it is usable. A switch behind an open door is a wasted run.

Sheets and formats decide how the set is used

For accuracy, Sunvega Design marks dimensions, door and window positions, and stair widths, then delivers DWG and PDF. The DWG stays editable for later coordination, while the PDF is what the site team reads on a tablet. Sending only one format usually costs a round trip.

A full set is listed at 45-65 sheets, and the count follows the modules selected. Fewer modules mean fewer sheets; the floor plan itself stays the same.

Every drawing from Sunvega Design includes two rounds of revisions. One round covers the whole set, so collect every comment before sending it back.

Five modules are sold one at a time

Buyers can order the five modules separately through Sunvega Design: floor plans, exterior renderings, construction drawings, plumbing, and electrical. Module scope is listed under online architectural design services. A 500 m² house carries 100 m² above the base, so the floor plan alone is USD 500.

Floor plans start at USD 400 and cover the first 400 m²; each m² above that is USD 1. The other four modules are USD 600 each up to the same 400 m², and a full set is USD 2,800. Above 400 m² those four are quoted from the actual area and scope.

Elevations and sections belong to the construction module, not to separate products. That keeps the building form, wall detail, and roof relationship in one coordinated scope. A package can be built in stages as the project needs more detail.

Size sets the timeline, and local rules set the limit

Published timing runs 5 days up to 4,000 sq ft, 10 days to 8,000 sq ft, and 15 days above that. Fewer modules can finish sooner; a full set sits at the long end.

Signatures, seals, permit applications, and approval stay with a registered architect or engineer in the project location, and those steps are not in the price.

Local rules can require another review before the drawings are accepted. That review belongs to the same local step, not to the drawing work. Ask which sheets the authority expects before ordering.

Where the set comes from

Instead of adapting stock plans, Sunvega Design redraws the whole set from the supplied floor plan and a short site video. More architectural project details are in the architecture project gallery. The video shows what a plan cannot: ceiling changes and exterior access.

There is no site visit, because Sunvega Design works online from start to finish. That is why the first step is sending measurements rather than booking a time. Window heights and stair positions come from the video, not from a guess.

Send your floor plan and a short site video to get a final quote. The quote follows the actual house. A change in scope updates the quote; the project does not start over.

Module What it includes Question it answers
Floor plan Room sizes, openings, stair width How the house is laid out
Exterior renderings Five fixed views What the house looks like
Construction drawings Walls, windows, stairs, wet areas How the house is built
Plumbing Supply, drainage, rainwater, septic Where water goes
Electrical Lighting, outlets, AC, TV Where power goes

Frequently asked questions

What is the difference between a floor plan and construction drawings?

The floor plan sets the layout. Construction drawings add wall buildup, sections, plumbing, and electrical detail.

How many sheets should a homeowner expect?

A full set runs 45-65 sheets. One module carries fewer sheets, and the count changes with scope.

Can the drawings be submitted for approval?

No. Signing, stamping, and approval belong to a registered professional in the project location.

Sources

Sunvega Design, "Online Architectural Design Services", accessed 4 November 2026.

Sunvega Design price sheet, 2026: module prices, sheet counts and full-set drawing range.

Last updated: November 2026.